add(system): gpadc config and startup speed.

device/config/chips/v851s3/configs/fastboot_sl100_front/board.dts

@@ -1630,9 +1630,9 @@
 	channel0_compare_higdata = <0>;
 	/*channel1_compare_lowdata = <460000>;*/
 	/*channel1_compare_higdata = <1200000>;*/
-	/*key_cnt = <5>;*/
+	key_cnt = <1>;
-	/*key0_vol = <210>;*/
+	key0_vol = <1800>;
-	/*key0_val = <115>;*/
+	key0_val = <115>;
 	/*key1_vol = <410>;*/
 	/*key1_val = <114>;*/
 	/*key2_vol = <590>;*/
@@ -1641,7 +1641,7 @@
 	/*key3_val = <28>;*/
 	/*key4_vol = <880>;*/
 	/*key4_val = <102>;*/
-	status = "disabled";
+	status = "okay";
 };
 
 &wiegand {

device/config/chips/v851s3/configs/fastboot_sl100_front/linux/config-4.9

@@ -1174,7 +1174,19 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_CST9220_HYNITRON_TS=m
 # CONFIG_INPUT_MISC is not set
 # CONFIG_RMI4_CORE is not set
-# CONFIG_INPUT_SENSOR is not set
+CONFIG_INPUT_SENSOR=y
+# CONFIG_SENSORS_BMA250 is not set
+# CONFIG_SENSORS_SC7A30 is not set
+# CONFIG_SENSORS_MMA7660 is not set
+# CONFIG_SENSORS_MIR3DA is not set
+# CONFIG_SENSORS_MXC622X is not set
+# CONFIG_SENSORS_MMA8452 is not set
+# CONFIG_SENSORS_MMA865X is not set
+# CONFIG_SENSORS_MC32X0 is not set
+CONFIG_SENSORS_GPADC=y
+# CONFIG_SENSORS_GPADC_TEST is not set
+# CONFIG_KEY_GPIO is not set
+# CONFIG_SENSORS_DA380 is not set
 # CONFIG_SENSORS_BMA2X2 is not set
 # CONFIG_SENSORS_BMA2X2_ENABLE_INT1 is not set
 # CONFIG_SENSORS_BMA2X2_ENABLE_INT2 is not set

target/allwinner/v851s3-fastboot_sl100_front/busybox-init-base-files/etc/init.d/rc.final

@@ -17,6 +17,10 @@ for i in /etc/init.d/S??* ;do
      # Ignore dangling symlinks (if any).
      [ ! -f "$i" ] && continue
 
+    if [ "$i" = "/etc/init.d/S99swupdate_autorun" ]; then  
+        continue
+    fi
+
      case "$i" in
     *.sh)
         # Source shell script for speed.
@@ -83,6 +87,14 @@ done
 #echo "---/mnt/extsd/---"
 #ls /mnt/extsd/
 
+echo 161  > /sys/class/gpio/export
+echo out > /sys/class/gpio/gpio161/direction
+echo 0 > /sys/class/gpio/gpio161/value
+
+echo 162  > /sys/class/gpio/export
+echo out > /sys/class/gpio/gpio162/direction
+echo 0 > /sys/class/gpio/gpio162/value
+
 echo 160  > /sys/class/gpio/export
 echo out > /sys/class/gpio/gpio160/direction
 echo 0 > /sys/class/gpio/gpio160/value
@@ -94,17 +106,28 @@ echo 1 > /sys/class/pwm/pwmchip0/pwm0/enable
 
 echo 1 > /sys/class/gpio/gpio160/value
 
-run_usb_adb
+# run_usb_adb
 
-setusbconfig rndis
+# setusbconfig rndis
 
-ifconfig usb0 up
+# ifconfig usb0 up
 
-ifconfig usb0 10.10.10.235
+# ifconfig usb0 10.10.10.235
 
-cp /APP/picture /mnt/UDISK/ -rf
+if [ ! -d "/mnt/UDISK/picture" ]; then
+    mkdir /mnt/UDISK/picture
+    echo "mkdir /mnt/UDISK/picture." 
+    cp -r /APP/picture/* /mnt/UDISK/picture
+fi
 
-cp /APP/res/*.aac /mnt/UDISK/
+for file in "/APP/res"/*.aac; do
+    if [ -f "$file" ]; then
+        dest_file="/mnt/UDISK/$(basename "$file")"
+        if [ ! -f "$dest_file" ]; then
+            cp "$file" "$dest_file"
+        fi
+    fi
+done
 
 if [ ! -f "/mnt/UDISK/pix_auth_key.bin" ]; then
     cp /APP/res/pix_auth_key.bin /mnt/UDISK/pix_auth_key.bin

target/allwinner/v851s3-fastboot_sl100_front/busybox-init-base-files/usr/bin/run_usb_adb

@@ -2,20 +2,20 @@
 
 MODULES_DIR="/lib/modules/`uname -r`"
 
-insmod $MODULES_DIR/configfs.ko
+# insmod $MODULES_DIR/configfs.ko
-insmod $MODULES_DIR/videobuf2-vmalloc.ko
+# insmod $MODULES_DIR/videobuf2-vmalloc.ko
-insmod $MODULES_DIR/usb-common.ko
+# insmod $MODULES_DIR/usb-common.ko
 insmod $MODULES_DIR/usbcore.ko
 insmod $MODULES_DIR/sunxi_hci.ko
 insmod $MODULES_DIR/ehci-hcd.ko
 insmod $MODULES_DIR/ohci-hcd.ko
-insmod $MODULES_DIR/udc-core.ko
+# insmod $MODULES_DIR/udc-core.ko
-insmod $MODULES_DIR/libcomposite.ko
+# insmod $MODULES_DIR/libcomposite.ko
-insmod $MODULES_DIR/sunxi_usb_udc.ko
+# insmod $MODULES_DIR/sunxi_usb_udc.ko
-insmod $MODULES_DIR/usb_f_fs.ko
+# insmod $MODULES_DIR/usb_f_fs.ko
-insmod $MODULES_DIR/usb_f_mass_storage.ko
+# insmod $MODULES_DIR/usb_f_mass_storage.ko
-insmod $MODULES_DIR/usb_f_hid.ko
+# insmod $MODULES_DIR/usb_f_hid.ko
-insmod $MODULES_DIR/usb_f_uvc.ko
+# insmod $MODULES_DIR/usb_f_uvc.ko
 insmod $MODULES_DIR/sunxi_usbc.ko
 
 if [ -f /lib/modules/4.9.191/videobuf2-vmalloc.ko ];then
@@ -46,7 +46,7 @@ if [ -f /lib/modules/4.9.191/snd-usb-audio.ko ];then
 insmod $MODULES_DIR/snd-usb-audio.ko
 fi
 
-cat /sys/devices/platform/soc/usbc0/usb_device
+# cat /sys/devices/platform/soc/usbc0/usb_device
-setusbconfig adb
+# setusbconfig adb
-adbd > /dev/null &
+# adbd > /dev/null &