后板配置

out/v851s-fastboot_sl100_back/image/Vboot.fex

@@ -0,0 +1 @@
+<EFBFBD><EFBFBD><EFBFBD><EFBFBD>

out/v851s-fastboot_sl100_back/image/Vrecovery.fex

@@ -0,0 +1 @@
+<EFBFBD><EFBFBD><EFBFBD>

out/v851s-fastboot_sl100_back/image/Vrootfs.fex

@@ -0,0 +1 @@
+<10>pz

out/v851s-fastboot_sl100_back/image/Vusr.fex

@@ -0,0 +1 @@
+<EFBFBD><EFBFBD>H<EFBFBD>

out/v851s-fastboot_sl100_back/image/sys_config.fex

@@ -0,0 +1,175 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+;---------------------------------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "evb"
+
+;----------------------------------------------------------------------------------
+;   system configuration
+;   ?
+;dcdc1_vol							---set dcdc1 voltage,mV,1600-3400,100mV/step
+;dcdc2_vol							---set dcdc2 voltage,mV,600-1540,20mV/step
+;dcdc3_vol							---set dcdc3 voltage,mV,600-1860,20mV/step
+;dcdc4_vol							---set dcdc4 voltage,mV,600-1540,20mV/step
+;dcdc5_vol							---set dcdc5 voltage,mV,1000-2550,50mV/step
+;aldo2_vol							---set aldo2 voltage,mV,700-3300,100mV/step
+;aldo3_vol							---set aldo3 voltage,mV,700-3300,100mV/step
+;----------------------------------------------------------------------------------
+[power_sply]
+dcdc1_vol                  = 3000
+dcdc2_vol                  = 1200
+dcdc3_vol                  = 1200
+dcdc4_vol                  = 1200
+dcdc5_vol                  = 1500
+aldo2_vol                  = 1800
+aldo3_vol                  = 3000
+
+;----------------------------------------------------------------------------------
+;		   7-6 bit   5-0 bit
+;power_mode	= grain_size|vol 设置系统电压，=0则不设置，范围900~1200mV
+;grain_size     = 电压粒度  0:10mV  1:20mV  2:50mV  3:100mV
+;vol		= 电压系数 =0则不设置
+;grain_size=0电压公式：sys_vol = 500mV + vol * 10mV
+;grain_size=1电压公式：sys_vol = 500mV + vol * 20mV
+;grain_size=2电压公式：sys_vol = 500mV + vol * 50mV
+;grain_size=3电压公式：sys_vol = 500mV + vol * 100mV
+;----------------------------------------------------------------------------------
+[target]
+storage_type    = 3
+nand_use_ubi	= 1
+power_mode      = 0
+
+[platform]
+debug_mode = 0
+
+[card_boot]
+logical_start   = 40960
+sprite_gpio0    =
+
+[card0_boot_para]
+card_ctrl       = 0
+card_high_speed = 1
+card_line       = 4
+sdc_d1          = port:PF0<2><1><default><default>
+sdc_d0          = port:PF1<2><1><default><default>
+sdc_clk         = port:PF2<2><1><default><default>
+sdc_cmd         = port:PF3<2><1><default><default>
+sdc_d3          = port:PF4<2><1><default><default>
+sdc_d2          = port:PF5<2><1><default><default>
+
+[card2_boot_para]
+card_ctrl       = 2
+card_high_speed = 1
+card_line       = 8
+sdc_clk         = port:PC0<3><1><3><default>
+sdc_cmd         = port:PC1<3><1><3><default>
+sdc_d0          = port:PC2<3><1><3><default>
+sdc_d1          = port:PC3<3><1><3><default>
+sdc_d2          = port:PC4<3><1><3><default>
+sdc_d3          = port:PC5<3><1><3><default>
+sdc_d4          = port:PC6<3><1><3><default>
+sdc_d5          = port:PC7<3><1><3><default>
+sdc_d6          = port:PC8<3><1><3><default>
+sdc_d7          = port:PC9<3><1><3><default>
+sdc_emmc_rst    = port:PC11<3><1><3><default>
+sdc_ds          = port:PC10<3><2><3><default>
+
+[spinor_para]
+;read_mode           =4
+;flash_size          =16
+;delay_cycle         =1
+;frequency           =100000000
+
+spi_sclk            = port:PC00<4><0><2><default>
+spi_cs              = port:PC01<4><1><2><default>
+spi0_mosi           = port:PC02<4><0><2><default>
+spi0_miso           = port:PC03<4><0><2><default>
+spi0_wp             = port:PC04<4><0><2><default>
+spi0_hold           = port:PC05<4><0><2><default>
+
+[twi_para]
+twi_used	= 1
+twi_port        = 4
+twi_scl         = port:PI01<6><1><default><default>
+twi_sda         = port:PI02<6><1><default><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx   = port:PH09<5><1><default><default>
+uart_debug_rx   = port:PH10<5><1><default><default>
+
+[jtag_para]
+jtag_enable     = 0
+jtag_ms         = port:PH9<3><default><default><default>
+jtag_ck         = port:PH10<3><default><default><default>
+jtag_do         = port:PH11<3><default><default><default>
+jtag_di         = port:PH12<3><default><default><default>
+
+;*****************************************************************************
+;sdram configuration
+;
+;*****************************************************************************
+[dram_para]
+
+dram_clk        = 936
+dram_type       = 3
+dram_zq         = 0x7b7bfb
+dram_odt_en     = 0x1
+dram_para1      = 0x0010f2
+dram_para2      = 0x0
+dram_mr0        = 0x1c70
+dram_mr1        = 0x42
+dram_mr2        = 0x18
+dram_mr3        = 0x0
+dram_tpr0       = 0x004A2195
+dram_tpr1       = 0x02423190
+dram_tpr2       = 0x0008B061
+dram_tpr3       = 0xB4787896
+dram_tpr4       = 0x1000
+dram_tpr5       = 0x48484848
+dram_tpr6       = 0x48
+dram_tpr7       = 0x1621121e
+dram_tpr8       = 0x0
+dram_tpr9       = 0x0
+dram_tpr10      = 0x0
+dram_tpr11      = 0x00120000
+dram_tpr12      = 0x00000057
+dram_tpr13      = 0x34080100
+
+[partitions]
+
+[partitions/env]
+offset = 32
+size = 128
+
+[partitions/env-redund]
+offset = 160
+size = 128
+
+[partitions/boot]
+offset = 288
+size = 4608
+
+[partitions/rootfs]
+offset = 4896
+size = 11136
+
+[partitions/extend]
+offset = 16032
+size = 2048
+
+[partitions/recovery]
+offset = 18080
+size = 5120
+
+[partitions/rootfs_data]
+offset = 23200
+size = 1024
+
+[partitions/UDISK]
+offset = 24224
+size = 0
+

out/v851s-fastboot_sl100_back/image/sys_config_fix.fex

@@ -0,0 +1,175 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+; 描述gpio的形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
+;---------------------------------------------------------------------------------------------------------
+
+[product]
+version = "100"
+machine = "evb"
+
+;----------------------------------------------------------------------------------
+;   system configuration
+;   ?
+;dcdc1_vol							---set dcdc1 voltage,mV,1600-3400,100mV/step
+;dcdc2_vol							---set dcdc2 voltage,mV,600-1540,20mV/step
+;dcdc3_vol							---set dcdc3 voltage,mV,600-1860,20mV/step
+;dcdc4_vol							---set dcdc4 voltage,mV,600-1540,20mV/step
+;dcdc5_vol							---set dcdc5 voltage,mV,1000-2550,50mV/step
+;aldo2_vol							---set aldo2 voltage,mV,700-3300,100mV/step
+;aldo3_vol							---set aldo3 voltage,mV,700-3300,100mV/step
+;----------------------------------------------------------------------------------
+[power_sply]
+dcdc1_vol                  = 3000
+dcdc2_vol                  = 1200
+dcdc3_vol                  = 1200
+dcdc4_vol                  = 1200
+dcdc5_vol                  = 1500
+aldo2_vol                  = 1800
+aldo3_vol                  = 3000
+
+;----------------------------------------------------------------------------------
+;		   7-6 bit   5-0 bit
+;power_mode	= grain_size|vol 设置系统电压，=0则不设置，范围900~1200mV
+;grain_size     = 电压粒度  0:10mV  1:20mV  2:50mV  3:100mV
+;vol		= 电压系数 =0则不设置
+;grain_size=0电压公式：sys_vol = 500mV + vol * 10mV
+;grain_size=1电压公式：sys_vol = 500mV + vol * 20mV
+;grain_size=2电压公式：sys_vol = 500mV + vol * 50mV
+;grain_size=3电压公式：sys_vol = 500mV + vol * 100mV
+;----------------------------------------------------------------------------------
+[target]
+storage_type    = 3
+nand_use_ubi	= 1
+power_mode      = 0
+
+[platform]
+debug_mode = 0
+
+[card_boot]
+logical_start   = 40960
+sprite_gpio0    =
+
+[card0_boot_para]
+card_ctrl       = 0
+card_high_speed = 1
+card_line       = 4
+sdc_d1          = port:PF0<2><1><default><default>
+sdc_d0          = port:PF1<2><1><default><default>
+sdc_clk         = port:PF2<2><1><default><default>
+sdc_cmd         = port:PF3<2><1><default><default>
+sdc_d3          = port:PF4<2><1><default><default>
+sdc_d2          = port:PF5<2><1><default><default>
+
+[card2_boot_para]
+card_ctrl       = 2
+card_high_speed = 1
+card_line       = 8
+sdc_clk         = port:PC0<3><1><3><default>
+sdc_cmd         = port:PC1<3><1><3><default>
+sdc_d0          = port:PC2<3><1><3><default>
+sdc_d1          = port:PC3<3><1><3><default>
+sdc_d2          = port:PC4<3><1><3><default>
+sdc_d3          = port:PC5<3><1><3><default>
+sdc_d4          = port:PC6<3><1><3><default>
+sdc_d5          = port:PC7<3><1><3><default>
+sdc_d6          = port:PC8<3><1><3><default>
+sdc_d7          = port:PC9<3><1><3><default>
+sdc_emmc_rst    = port:PC11<3><1><3><default>
+sdc_ds          = port:PC10<3><2><3><default>
+
+[spinor_para]
+;read_mode           =4
+;flash_size          =16
+;delay_cycle         =1
+;frequency           =100000000
+
+spi_sclk            = port:PC00<4><0><2><default>
+spi_cs              = port:PC01<4><1><2><default>
+spi0_mosi           = port:PC02<4><0><2><default>
+spi0_miso           = port:PC03<4><0><2><default>
+spi0_wp             = port:PC04<4><0><2><default>
+spi0_hold           = port:PC05<4><0><2><default>
+
+[twi_para]
+twi_used	= 1
+twi_port        = 4
+twi_scl         = port:PI01<6><1><default><default>
+twi_sda         = port:PI02<6><1><default><default>
+
+[uart_para]
+uart_debug_port = 0
+uart_debug_tx   = port:PH09<5><1><default><default>
+uart_debug_rx   = port:PH10<5><1><default><default>
+
+[jtag_para]
+jtag_enable     = 0
+jtag_ms         = port:PH9<3><default><default><default>
+jtag_ck         = port:PH10<3><default><default><default>
+jtag_do         = port:PH11<3><default><default><default>
+jtag_di         = port:PH12<3><default><default><default>
+
+;*****************************************************************************
+;sdram configuration
+;
+;*****************************************************************************
+[dram]
+
+dram_clk        = 936
+dram_type       = 3
+dram_zq         = 0x7b7bfb
+dram_odt_en     = 0x1
+dram_para1      = 0x0010f2
+dram_para2      = 0x0
+dram_mr0        = 0x1c70
+dram_mr1        = 0x42
+dram_mr2        = 0x18
+dram_mr3        = 0x0
+dram_tpr0       = 0x004A2195
+dram_tpr1       = 0x02423190
+dram_tpr2       = 0x0008B061
+dram_tpr3       = 0xB4787896
+dram_tpr4       = 0x1000
+dram_tpr5       = 0x48484848
+dram_tpr6       = 0x48
+dram_tpr7       = 0x1621121e
+dram_tpr8       = 0x0
+dram_tpr9       = 0x0
+dram_tpr10      = 0x0
+dram_tpr11      = 0x00120000
+dram_tpr12      = 0x00000057
+dram_tpr13      = 0x34080100
+
+[partitions]
+
+[partitions/env]
+offset = 32
+size = 128
+
+[partitions/env-redund]
+offset = 160
+size = 128
+
+[partitions/boot]
+offset = 288
+size = 4608
+
+[partitions/rootfs]
+offset = 4896
+size = 11136
+
+[partitions/extend]
+offset = 16032
+size = 2048
+
+[partitions/recovery]
+offset = 18080
+size = 5120
+
+[partitions/rootfs_data]
+offset = 23200
+size = 1024
+
+[partitions/UDISK]
+offset = 24224
+size = 0
+

out/v851s-fastboot_sl100_back/image/sys_partition.fex

@@ -0,0 +1,147 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+;---------------------------------------------------------------------------------------------------------
+
+
+;--------------------------------------------------------------------------------------------------
+;                                   固件下载参数配置
+;--------------------------------------------------------------------------------------------------
+;****************************************************
+;    mbr的大小, 以Kbyte为单位
+;****************************************************
+[mbr]
+size = 16
+
+;********************************************************************************************************
+;                                              分区配置
+;
+;
+;  partition 定义范例:
+;    [partition]                ;  //表示是一个分区
+;    name        = USERFS2      ; //分区名称
+;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
+;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
+;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
+;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
+;    user_type   = ?            ; //私有用法
+;    verify      = 1            ; //要求量产完成后校验是否正确
+;
+; 注：1、name唯一, 不允许同名
+;     2、name最大12个字符
+;     3、size = 0, 将创建一个无大小的空分区
+;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
+;********************************************************************************************************
+[partition_start]
+
+[partition]
+    name         = env
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = env-redund
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = boot
+	size         = 4608
+    downloadfile = "boot.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs
+    size         = 11136
+    downloadfile = "rootfs.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = extend
+	size         = 2048
+    downloadfile = "usr.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = recovery
+    size         = 5120
+    downloadfile = "recovery.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs_data
+    size         = 1024
+    user_type    = 0x8000
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+;[partition]
+;    name         = boot
+;    size         = 4480
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = boot_backup
+;    size         = 3712
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs
+;    size         = 4352
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_backup
+;    size         = 1280
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = extend
+;    size         = 2304
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000
+;	
+;[partition]
+;    name         = extend_backup
+;    size         = 768
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000	
+;
+;;[partition]
+;;    name         = recovery
+;    size         = 6400
+;;    downloadfile = "recovery.fex"
+;;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_data
+;    size         = 1024
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = env
+;    size         = 128
+;    downloadfile = "env.fex"
+;    user_type    = 0x8000
+
+

out/v851s-fastboot_sl100_back/image/sys_partition_for_dragon.fex

@@ -0,0 +1,147 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+;---------------------------------------------------------------------------------------------------------
+
+
+;--------------------------------------------------------------------------------------------------
+;                                   固件下载参数配置
+;--------------------------------------------------------------------------------------------------
+;****************************************************
+;    mbr的大小, 以Kbyte为单位
+;****************************************************
+[mbr]
+size = 16
+
+;********************************************************************************************************
+;                                              分区配置
+;
+;
+;  partition 定义范例:
+;    [partition]                ;  //表示是一个分区
+;    name        = USERFS2      ; //分区名称
+;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
+;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
+;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
+;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
+;    user_type   = ?            ; //私有用法
+;    verify      = 1            ; //要求量产完成后校验是否正确
+;
+; 注：1、name唯一, 不允许同名
+;     2、name最大12个字符
+;     3、size = 0, 将创建一个无大小的空分区
+;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
+;********************************************************************************************************
+[partition_start]
+
+[partition]
+    name         = env
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = env-redund
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = boot
+	size         = 4608
+    downloadfile = "boot.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs
+    size         = 11136
+    downloadfile = "rootfs.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = extend
+	size         = 2048
+    downloadfile = "usr.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = recovery
+    size         = 5120
+    downloadfile = "recovery.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs_data
+    size         = 1024
+    user_type    = 0x8000
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+;[partition]
+;    name         = boot
+;    size         = 4480
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = boot_backup
+;    size         = 3712
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs
+;    size         = 4352
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_backup
+;    size         = 1280
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = extend
+;    size         = 2304
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000
+;	
+;[partition]
+;    name         = extend_backup
+;    size         = 768
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000	
+;
+;;[partition]
+;;    name         = recovery
+;    size         = 6400
+;;    downloadfile = "recovery.fex"
+;;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_data
+;    size         = 1024
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = env
+;    size         = 128
+;    downloadfile = "env.fex"
+;    user_type    = 0x8000
+
+

out/v851s-fastboot_sl100_back/image/sys_partition_nor.fex

@@ -0,0 +1,147 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+;---------------------------------------------------------------------------------------------------------
+
+
+;--------------------------------------------------------------------------------------------------
+;                                   固件下载参数配置
+;--------------------------------------------------------------------------------------------------
+;****************************************************
+;    mbr的大小, 以Kbyte为单位
+;****************************************************
+[mbr]
+size = 16
+
+;********************************************************************************************************
+;                                              分区配置
+;
+;
+;  partition 定义范例:
+;    [partition]                ;  //表示是一个分区
+;    name        = USERFS2      ; //分区名称
+;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
+;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
+;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
+;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
+;    user_type   = ?            ; //私有用法
+;    verify      = 1            ; //要求量产完成后校验是否正确
+;
+; 注：1、name唯一, 不允许同名
+;     2、name最大12个字符
+;     3、size = 0, 将创建一个无大小的空分区
+;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
+;********************************************************************************************************
+[partition_start]
+
+[partition]
+    name         = env
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = env-redund
+    size         = 128
+    downloadfile = "env.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = boot
+	size         = 4608
+    downloadfile = "boot.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs
+    size         = 11136
+    downloadfile = "rootfs.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = extend
+	size         = 2048
+    downloadfile = "usr.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = recovery
+    size         = 5120
+    downloadfile = "recovery.fex"
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs_data
+    size         = 1024
+    user_type    = 0x8000
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+;[partition]
+;    name         = boot
+;    size         = 4480
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = boot_backup
+;    size         = 3712
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs
+;    size         = 4352
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_backup
+;    size         = 1280
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = extend
+;    size         = 2304
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000
+;	
+;[partition]
+;    name         = extend_backup
+;    size         = 768
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000	
+;
+;;[partition]
+;;    name         = recovery
+;    size         = 6400
+;;    downloadfile = "recovery.fex"
+;;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_data
+;    size         = 1024
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = env
+;    size         = 128
+;    downloadfile = "env.fex"
+;    user_type    = 0x8000
+
+

out/v851s-fastboot_sl100_back/image/sys_partition_tmp_app.fex

@@ -0,0 +1,141 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+;---------------------------------------------------------------------------------------------------------
+
+
+;--------------------------------------------------------------------------------------------------
+;                                   固件下载参数配置
+;--------------------------------------------------------------------------------------------------
+;****************************************************
+;    mbr的大小, 以Kbyte为单位
+;****************************************************
+[mbr]
+size = 16
+
+;********************************************************************************************************
+;                                              分区配置
+;
+;
+;  partition 定义范例:
+;    [partition]                ;  //表示是一个分区
+;    name        = USERFS2      ; //分区名称
+;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
+;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
+;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
+;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
+;    user_type   = ?            ; //私有用法
+;    verify      = 1            ; //要求量产完成后校验是否正确
+;
+; 注：1、name唯一, 不允许同名
+;     2、name最大12个字符
+;     3、size = 0, 将创建一个无大小的空分区
+;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
+;********************************************************************************************************
+[partition_start]
+
+[partition]
+    name         = env
+    size         = 128
+    user_type    = 0x8000
+
+[partition]
+    name         = env-redund
+    size         = 128
+    user_type    = 0x8000
+
+[partition]
+    name         = boot
+	size         = 4608
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs
+    size         = 11136
+    user_type    = 0x8000
+
+[partition]
+    name         = extend
+	size         = 2048
+    user_type    = 0x8000
+
+[partition]
+    name         = recovery
+    size         = 5120
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs_data
+    size         = 1024
+    user_type    = 0x8000
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+;[partition]
+;    name         = boot
+;    size         = 4480
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = boot_backup
+;    size         = 3712
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs
+;    size         = 4352
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_backup
+;    size         = 1280
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = extend
+;    size         = 2304
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000
+;	
+;[partition]
+;    name         = extend_backup
+;    size         = 768
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000	
+;
+;;[partition]
+;;    name         = recovery
+;    size         = 6400
+;;    downloadfile = "recovery.fex"
+;;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_data
+;    size         = 1024
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = env
+;    size         = 128
+;    downloadfile = "env.fex"
+;    user_type    = 0x8000
+
+

out/v851s-fastboot_sl100_back/image/sys_partition_tmp_data.fex

@@ -0,0 +1,141 @@
+;---------------------------------------------------------------------------------------------------------
+; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
+;---------------------------------------------------------------------------------------------------------
+
+
+;--------------------------------------------------------------------------------------------------
+;                                   固件下载参数配置
+;--------------------------------------------------------------------------------------------------
+;****************************************************
+;    mbr的大小, 以Kbyte为单位
+;****************************************************
+[mbr]
+size = 16
+
+;********************************************************************************************************
+;                                              分区配置
+;
+;
+;  partition 定义范例:
+;    [partition]                ;  //表示是一个分区
+;    name        = USERFS2      ; //分区名称
+;    size        = 16384        ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
+;    downloadfile = "123.fex"   ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
+;    keydata     = 1            ; //私有数据分区，重新量产数据将不丢失
+;    encrypt     = 1            ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
+;    user_type   = ?            ; //私有用法
+;    verify      = 1            ; //要求量产完成后校验是否正确
+;
+; 注：1、name唯一, 不允许同名
+;     2、name最大12个字符
+;     3、size = 0, 将创建一个无大小的空分区
+;     4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
+;********************************************************************************************************
+[partition_start]
+
+[partition]
+    name         = env
+    size         = 128
+    user_type    = 0x8000
+
+[partition]
+    name         = env-redund
+    size         = 128
+    user_type    = 0x8000
+
+[partition]
+    name         = boot
+	size         = 4608
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs
+    size         = 11136
+    user_type    = 0x8000
+
+[partition]
+    name         = extend
+	size         = 2048
+    user_type    = 0x8000
+
+[partition]
+    name         = recovery
+    size         = 5120
+    user_type    = 0x8000
+
+[partition]
+    name         = rootfs_data
+    size         = 1024
+    user_type    = 0x8000
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+;[partition]
+;    name         = boot
+;    size         = 4480
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = boot_backup
+;    size         = 3712
+;    downloadfile = "boot.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs
+;    size         = 4352
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_backup
+;    size         = 1280
+;    downloadfile = "rootfs.fex"
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = extend
+;    size         = 2304
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000
+;	
+;[partition]
+;    name         = extend_backup
+;    size         = 768
+;    downloadfile = "usr.fex"
+;    user_type    = 0x8000	
+;
+;;[partition]
+;;    name         = recovery
+;    size         = 6400
+;;    downloadfile = "recovery.fex"
+;;    user_type    = 0x8000
+;
+;[partition]
+;    name         = rootfs_data
+;    size         = 1024
+;    user_type    = 0x8000
+;
+;[partition]
+;    name         = env
+;    size         = 128
+;    downloadfile = "env.fex"
+;    user_type    = 0x8000
+
+