添加后板sdk更改,裁剪文件系统和kernel

lichee/brandy-2.0/spl/board/sun8iw21p1/commonfastboot_sl100_back.mk

@@ -0,0 +1,32 @@
+
+#
+#config file for sun8iw21
+#
+SUPPORT_BOARD=qg3101 r853s v851 v853 v853s r853
+ARCH = arm
+PLATFORM = sun8iw21p1
+
+CFG_BOOT0_RUN_ADDR=0x20000
+CFG_SYS_INIT_RAM_SIZE=0x10000
+CFG_FES1_RUN_ADDR=0x28000
+CFG_SBOOT_RUN_ADDR=0x20480
+CFG_SUNXI_GPIO_V2=y
+#CFG_SUNXI_FDT=y
+
+#LOGO
+CFG_BOOT0_LOGO_TO_KERNEL=y
+
+#ISP
+CFG_BOOT0_WIRTE_RTC_TO_ISP=y
+CFG_ISPFLAG_RTC_INDEX=0x1
+CFG_ISPFLAG_RTC_VALUE=0x1
+
+CFG_SUNXI_EFUSE =y
+
+#E907
+CFG_RISCV_E907=y
+CFG_SUNXI_ELF=y
+CFG_MELISELF_LOAD_ADDR=0x43080000
+
+#E907 interrupt table info update
+#CFG_UPDATA_IRQ_TAB=y

lichee/brandy-2.0/spl/board/sun8iw21p1/spinorfastboot_sl100_back.mk

@@ -0,0 +1,63 @@
+
+#
+#config file for sun8iw21 fastboot
+#
+#stroage
+FILE_EXIST=$(shell if [ -f $(TOPDIR)/board/$(PLATFORM)/common.mk ]; then echo yes; else echo no; fi;)
+EXT_FILE_EXIST=$(shell if [ -f $(TOPDIR)/board/$(PLATFORM)/common$(LICHEE_BOARD).mk ]; then echo yes; else echo no; fi;)
+ifeq (x$(EXT_FILE_EXIST),xyes)
+include $(TOPDIR)/board/$(PLATFORM)/common$(LICHEE_BOARD).mk
+else ifeq (x$(FILE_EXIST),xyes)
+include $(TOPDIR)/board/$(PLATFORM)/common.mk
+else
+include $(TOPDIR)/board/$(CP_BOARD)/common.mk
+endif
+
+MODULE=spinorfastboot
+CFG_SUNXI_SPINOR =y
+CFG_SUNXI_SPI =y
+CFG_SUNXI_SPIF =y
+CFG_SUNXI_DMA =y
+CFG_SPI_USE_DMA =y
+CFG_SPINOR_UBOOT_OFFSET=128
+
+
+#CFG_SUNXI_FDT=y
+
+CFG_BOOT0_LOAD_KERNEL=y
+CFG_KERNEL_BOOTIMAGE=y
+CFG_KERNEL_CHECKSUM=n #y will check kernel checksum in bimage, but slower
+CFG_KERNEL_LOAD_ADDR=0x40007800
+CFG_SUNXI_FDT_ADDR=0x41d00000
+#CFG_LOAD_DTB_FROM_KERNEL=y
+CFG_SUNXI_NO_UPDATE_FDT_CHOSEN=y
+#CFG_SUNXI_SUPPORT_RAMDISK=y
+#CFG_RAMDISK_ADDR=0x43000000
+
+CFG_SUNXI_GPT=y
+CFG_SPINOR_GPT_ARD=4064 # 0 or 40960 sector
+CFG_SUNXI_ENV=y
+CFG_SUNXI_ENV_SIZE=0x1000 # linux should be the same with LICHEE_REDUNDANT_ENV_SIZE.
+CFG_SUNXI_HAVE_REDUNDENV=y
+
+
+#IR STATE
+CFG_BOOT0_WRITE_IRSATTE_TO_ISP=y
+CFG_SUNXI_PHY_KEY=y
+CFG_GPADC_KEY=y
+
+CFG_BOOT0_LOAD_FLASH=y
+CFG_BOOT0_LOAD_ISPPARM=y
+CFG_ISPPARAM_LOAD_ADDR=0x43BFE000
+CFG_ISPPARAM_SIZE=0x10 #unit:sector
+CFG_SPINOR_ISPPARAM_OFFSET=CFG_SPINOR_UBOOT_OFFSET - CFG_ISPPARAM_SIZE - 0x8
+
+CFG_SET_GPIO_NEW=y
+
+#ISP
+CFG_BOOT0_WIRTE_RTC_TO_ISP=y
+CFG_ISPFLAG_RTC_INDEX=0x1
+CFG_ISPFLAG_RTC_VALUE=0x1
+
+CFG_SUNXI_EFUSE =y
+CFG_MELISELF_LOAD_ADDR=0x43080000