#!/bin/sh

echo "------run rc.final file-----"
#echo "insmod wifi modules"
#insmod  /lib/modules/3.4.39/8723ds.ko
#insmod  /lib/modules/3.4.39/bcmdhd.ko
#insmod  /lib/modules/3.4.39/xradio_mac.ko
#insmod  /lib/modules/3.4.39/xradio_core.ko
#insmod  /lib/modules/3.4.39/xradio_wlan.ko

export LD_LIBRARY_PATH=/usr/lib/eyesee-mpp:${LD_LIBRARY_PATH}
ulimit -c unlimited
echo /mnt/extsd/coredump-%e-%p-%s-%t > /proc/sys/kernel/core_pattern

for i in /etc/init.d/S??* ;do

     # Ignore dangling symlinks (if any).
     [ ! -f "$i" ] && continue

    if [ "$i" = "/etc/init.d/S99swupdate_autorun" ]; then  
        continue
    fi

     case "$i" in
    *.sh)
        # Source shell script for speed.
        (
        trap - INT QUIT TSTP
        set start
        . $i
        )
        ;;
    *)
        # No sh extension, so fork subprocess.
        $i start
        ;;
    esac
done

#LOOP_CNT=0
#SD_DEV=
#while [ 1 ];do
#	if [ $LOOP_CNT -eq 3 ];then
#		echo wait SD Card ready timeout
#		break;
#	fi
#	if [ -b /dev/mmcblk1p1 ];then
#		SD_DEV=/dev/mmcblk1p1
#		break;
#	elif [ -b /dev/mmcblk1 ];then
#		SD_DEV=/dev/mmcblk1
#		break;
#	elif [ -b /dev/mmcblk0p1 ];then
#		SD_DEV=/dev/mmcblk0p1
#		break;
#	elif [ -b /dev/mmcblk0 ];then
#		SD_DEV=/dev/mmcblk0
#		break;
#	else
#		echo SD Card not ready, wait
#	fi
#	LOOP_CNT=$(($LOOP_CNT+1))
#	sleep 1
#done
#
# repair sd card file
#if [ "x$SD_DEV" != "x" ]; then
#	echo SD Card is ready
#
#	if [ -f /usr/bin/fsck_msdos ]; then
#		/usr/bin/fsck_msdos -pfS $SD_DEV
#	fi
#fi

#if [ -z "$(grep '\<vfat\>' /proc/mounts)" ]; then
#    ! /bin/mount -t vfat /dev/mmcblk0 /mnt/extsd 2>/dev/null &&
#    /bin/mount -t vfat /dev/mmcblk0p1 /mnt/extsd
#fi

#sleep 1
#echo "start mv stream..."
#ls /tmp/
#rm -rf /mnt/extsd/stream*.h264
#rm -rf /mnt/extsd/data*.jpg
#mv /tmp/stream*.h264 /mnt/extsd/
#mv /tmp/data*.jpg /mnt/extsd/
#echo "---/mnt/extsd/---"
#ls /mnt/extsd/

echo 161  > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio161/direction
echo 0 > /sys/class/gpio/gpio161/value

echo 162  > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio162/direction
echo 0 > /sys/class/gpio/gpio162/value

echo 160  > /sys/class/gpio/export
echo out > /sys/class/gpio/gpio160/direction
echo 0 > /sys/class/gpio/gpio160/value

echo 164  > /sys/class/gpio/export
# echo out > /sys/class/gpio/gpio164/direction
echo in > /sys/class/gpio/gpio164/direction
# echo 0 > /sys/class/gpio/gpio164/value

echo 0 > /sys/class/pwm/pwmchip0/export
echo 100000 > /sys/class/pwm/pwmchip0/pwm0/period
echo 70000 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle
echo 1 > /sys/class/pwm/pwmchip0/pwm0/enable

# echo 1 > /sys/class/gpio/gpio160/value
# echo 1 > /sys/class/gpio/gpio164/value

# run_usb_adb

# setusbconfig rndis

# ifconfig usb0 up

# ifconfig usb0 10.10.10.235

if [ ! -d "/mnt/UDISK/picture" ]; then
    mkdir /mnt/UDISK/picture
    echo "mkdir /mnt/UDISK/picture." 
    cp -r /APP/picture/* /mnt/UDISK/picture
fi

for file in "/APP/res"/*.aac; do
    if [ -f "$file" ]; then
        dest_file="/mnt/UDISK/$(basename "$file")"
        if [ ! -f "$dest_file" ]; then
            cp "$file" "$dest_file"
        fi
    fi
done

if [ ! -f "/mnt/UDISK/pix_auth_key.bin" ]; then
    cp /APP/res/pix_auth_key.bin /mnt/UDISK/pix_auth_key.bin
fi

#  /APP/SL100FRONTPANEL &