/*
 * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
 */
#ifndef _SUNXI_I2C_H_
#define _SUNXI_I2C_H_

#include <common.h>
#include <asm/io.h>

#ifdef CONFIG_I2C0_ENABLE
#define CONFIG_I2C_MVTWSI_BASE0	SUNXI_TWI0_BASE
#endif
#ifdef CONFIG_I2C1_ENABLE
#define CONFIG_I2C_MVTWSI_BASE1	SUNXI_TWI1_BASE
#endif
#ifdef CONFIG_I2C2_ENABLE
#define CONFIG_I2C_MVTWSI_BASE2	SUNXI_TWI2_BASE
#endif
#ifdef CONFIG_I2C3_ENABLE
#define CONFIG_I2C_MVTWSI_BASE3	SUNXI_TWI3_BASE
#endif
#ifdef CONFIG_I2C4_ENABLE
#define CONFIG_I2C_MVTWSI_BASE4	SUNXI_TWI4_BASE
#endif
#ifdef CONFIG_R_I2C_ENABLE
#define CONFIG_I2C_MVTWSI_BASE5 SUNXI_R_TWI_BASE
#endif

enum {
	SUNXI_PHY_I2C0 = 0,

	SUNXI_PHY_I2C1,

	SUNXI_PHY_I2C2,

	SUNXI_PHY_I2C3,

	SUNXI_PHY_I2C4,

	SUNXI_PHY_I2C5,

	SUNXI_PHY_R_I2C0,

	SUNXI_PHY_R_I2C1,

	/*The new i2c bus must be added before SUNXI_PHY_I2C_BUS_MAX*/
	SUNXI_PHY_I2C_BUS_MAX,

};

/* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */
#define CONFIG_SYS_TCLK		24000000
#define TWI_CONTROL_OFFSET             0x400
#define SUNXI_I2C_CONTROLLER             3

/* TWI Control Register Bit Fields & Masks, default value: 0x0000_0000*/
#define TWI_CTL_ACK     (0x1<<2)
#define TWI_CTL_INTFLG  (0x1<<3)
#define TWI_CTL_STP     (0x1<<4)
#define TWI_CTL_STA     (0x1<<5)
#define TWI_CTL_BUSEN   (0x1<<6)
#define TWI_CTL_INTEN   (0x1<<7)
#define TWI_LCR_WMASK   (TWI_CTL_STA|TWI_CTL_STP|TWI_CTL_INTFLG)


struct sunxi_twi_reg {
	volatile unsigned int addr;        /* slave address     */
	volatile unsigned int xaddr;       /* extend address    */
	volatile unsigned int data;        /* data              */
	volatile unsigned int ctl;         /* control           */
	volatile unsigned int status;      /* status            */
	volatile unsigned int clk;         /* clock             */
	volatile unsigned int srst;        /* soft reset        */
	volatile unsigned int eft;         /* enhanced future   */
	volatile unsigned int lcr;         /* line control      */
	volatile unsigned int dvfs;        /* dvfs control      */
};

#ifdef I2C_DEBUG
#define i2c_info(fmt...) printf("[i2c][info]: " fmt)
#define i2c_err(fmt...) printf("[i2c][err]: " fmt)
#else
#define i2c_info(fmt...)
#define i2c_err(fmt...) printf("[i2c][err]: " fmt)
#endif


void i2c_init_cpus(int speed, int slaveaddr);
int i2c_read(u8 chip, uint addr, int alen, u8 *buffer, int len);
int i2c_write(u8 chip, uint addr, int alen, u8 *buffer, int len);



#endif