menu "Remoteproc drivers"

# REMOTEPROC gets selected by whoever wants it
config REMOTEPROC
	tristate
	depends on HAS_DMA
	select CRC32
	select FW_LOADER
	select VIRTIO
	select VIRTUALIZATION

config OMAP_REMOTEPROC
	tristate "OMAP remoteproc support"
	depends on HAS_DMA
	depends on ARCH_OMAP4 || SOC_OMAP5
	depends on OMAP_IOMMU
	select REMOTEPROC
	select MAILBOX
	select OMAP2PLUS_MBOX
	select RPMSG_VIRTIO
	help
	  Say y here to support OMAP's remote processors (dual M3
	  and DSP on OMAP4) via the remote processor framework.

	  Currently only supported on OMAP4.

	  Usually you want to say y here, in order to enable multimedia
	  use-cases to run on your platform (multimedia codecs are
	  offloaded to remote DSP processors using this framework).

	  It's safe to say n here if you're not interested in multimedia
	  offloading or just want a bare minimum kernel.

config STE_MODEM_RPROC
	tristate "STE-Modem remoteproc support"
	depends on HAS_DMA
	select REMOTEPROC
	default n
	help
	  Say y or m here to support STE-Modem shared memory driver.
	  This can be either built-in or a loadable module.
	  If unsure say N.

menuconfig SUNXI_RPROC
	tristate "SUNXI remote processor support"
	select REMOTEPROC
	depends on ARCH_SUNXI && SUNXI_MBOX
	default n
	help
	  Say y or m here to support SUNXI remote processor
	  shared memory driver.
	  This can be either built-in or a loadable module.
	  If unsure say N.
	config SUNXI_RPROC_SHARE_IRQ
		bool "SUNXI remote share irq support"
		depends on SUNXI_RPROC
		default n
		help
		  Say y or m here to support SUNXI remote share irq
		  driver.
	config SUNXI_RPROC_FASTBOOT
		bool "SUNXI remote processor fastboot support"
		depends on SUNXI_RPROC
		default n
		help
		  Say y or m here to support SUNXI remote processor
		  fastboot driver.
		  This can be speed up init time.
	config SUNXI_RPROC_BOOT_PACKAGE
		bool "SUNXI remote processor boot from boot_package"
		depends on SUNXI_RPROC
		default n if !SUNXI_RPROC_FASTBOOT
		default y if SUNXI_RPROC_FASTBOOT
		help
		  Say y or m here to support SUNXI remote processor
		  boot from boot_package.fex.
		  This can be speed up init time.
	config SUNXI_RPROC_TRACE_DEV
		bool "SUNXI remote processor trace drivers support"
		depends on SUNXI_RPROC
		default y
		help
		  Say y or m here to support SUNXI remote processor
		  trace drivers support.
	config SUNXI_RPROC_RT_THREAD_PRIO
		int "sunxi remoteproc thread priority"
		range 0 99
		default 90
		depends on SUNXI_REMOTEPROC_RT_THREAD
		help
		  change the rt-thread priority for rproc.
		  99 is higiest priority.
		  trace drivers support.

choice
	prompt "Allwinner remoteproc boot select"
config SUNXI_REMOTEPROC_E907_BOOT
	bool "Allwinner remoteproc e907 boot"
	depends on SUNXI_RPROC
	help
	  Say y here to support Allwinner SOC processors e906 via
	  remote processor framework.

config SUNXI_REMOTEPROC_HIFI4_BOOT
	bool "Allwinner remoteproc hifi4 boot"
	depends on SUNXI_RPROC
	help
	  Say y here to support Allwinner SOC processors hifi4 via
	  remote processor framework.
endchoice

choice
	prompt "Allwinner remoteproc callback implementation"
	default SUNXI_REMOTEPROC_WQ
config SUNXI_REMOTEPROC_WQ
	bool "workqueue implementation"
	depends on SUNXI_RPROC
config SUNXI_REMOTEPROC_RT_THREAD
	bool "real-time thread implementation"
	depends on SUNXI_RPROC
endchoice

config WKUP_M3_RPROC
	tristate "AMx3xx Wakeup M3 remoteproc support"
	depends on SOC_AM33XX || SOC_AM43XX
	select REMOTEPROC
	help
	  Say y here to support Wakeup M3 remote processor on TI AM33xx
	  and AM43xx family of SoCs.

	  Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
	  for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
	  firmware onto these remote processors.
	  If unsure say N.

config DA8XX_REMOTEPROC
	tristate "DA8xx/OMAP-L13x remoteproc support"
	depends on ARCH_DAVINCI_DA8XX
	select CMA if MMU
	select REMOTEPROC
	select RPMSG_VIRTIO
	help
	  Say y here to support DA8xx/OMAP-L13x remote processors via the
	  remote processor framework.

	  You want to say y here in order to enable AMP
	  use-cases to run on your platform (multimedia codecs are
	  offloaded to remote DSP processors using this framework).

	  This module controls the name of the firmware file that gets
	  loaded on the DSP.  This file must reside in the /lib/firmware
	  directory.  It can be specified via the module parameter
	  da8xx_fw_name=<filename>, and if not specified will default to
	  "rproc-dsp-fw".

	  It's safe to say n here if you're not interested in multimedia
	  offloading.

config QCOM_MDT_LOADER
	tristate

config QCOM_Q6V5_PIL
	tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	select MFD_SYSCON
	select QCOM_MDT_LOADER
	select REMOTEPROC
	help
	  Say y here to support the Qualcomm Peripherial Image Loader for the
	  Hexagon V5 based remote processors.

config QCOM_WCNSS_PIL
	tristate "Qualcomm WCNSS Peripheral Image Loader"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	select QCOM_MDT_LOADER
	select QCOM_SCM
	select REMOTEPROC
	help
	  Say y here to support the Peripheral Image Loader for the Qualcomm
	  Wireless Connectivity Subsystem.

config ST_REMOTEPROC
	tristate "ST remoteproc support"
	depends on ARCH_STI
	select REMOTEPROC
	help
	  Say y here to support ST's adjunct processors via the remote
	  processor framework.
	  This can be either built-in or a loadable module.

endmenu