/*
 * Copyright (C) 2017 XRADIO TECHNOLOGY CO., LTD. All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *    1. Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *    2. Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the
 *       distribution.
 *    3. Neither the name of XRADIO TECHNOLOGY CO., LTD. nor the names of
 *       its contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _DRIVER_CHIP_PRIVATE_HAL_DEBUG_H_
#define _DRIVER_CHIP_PRIVATE_HAL_DEBUG_H_

#include <stdio.h>
#include "sys/xr_util.h"

#ifdef __cplusplus
extern "C" {
#endif

/* debug */
#define HAL_SYSLOG      printf

#define HAL_DBG_ON      1
#define HAL_WRN_ON      1
#define HAL_ERR_ON      1
#define HAL_ABORT_ON    0

#define HAL_DBG_TIMER   0
#define HAL_DBG_WDG     0
#define HAL_DBG_MBOX    0
#define HAL_DBG_I2C     0

#define HAL_ABORT()     sys_abort()

#define HAL_LOG(flags, fmt, arg...) \
	do {                            \
		if (flags)                  \
			HAL_SYSLOG(fmt, ##arg); \
	} while (0)


#define HAL_DBG(fmt, arg...)    HAL_LOG(HAL_DBG_ON, "[HAL] "fmt, ##arg)

#define HAL_TIMER_DBG(fmt, arg...)  \
    HAL_LOG(HAL_DBG_ON && HAL_DBG_TIMER, "[HAL TIMER] "fmt, ##arg)

#define HAL_WDG_DBG(fmt, arg...)    \
    HAL_LOG(HAL_DBG_ON && HAL_DBG_WDG, "[HAL WDG] "fmt, ##arg)

#define HAL_MBOX_DBG(fmt, arg...)   \
    HAL_LOG(HAL_DBG_ON && HAL_DBG_MBOX, "[HAL MBOX] "fmt, ##arg)

#define HAL_I2C_DBG(fmt, arg...)    \
    HAL_LOG(HAL_DBG_ON && HAL_DBG_I2C, "[HAL I2C] "fmt, ##arg)

#define HAL_WRN(fmt, arg...)    HAL_LOG(HAL_WRN_ON, "[HAL WRN] "fmt, ##arg)

#define HAL_ERR(fmt, arg...)                            \
	do {                                                \
		HAL_LOG(HAL_ERR_ON, "[HAL ERR] %s():%d, "fmt,   \
		        __func__, __LINE__, ##arg);             \
		if (HAL_ABORT_ON)                               \
			HAL_ABORT();                                \
	} while (0)

#define HAL_ASSERT_PARAM(exp)                                           \
	do {                                                                \
		if (!(exp)) {                                                   \
			HAL_SYSLOG("Invalid param at %s:%d\n", __func__, __LINE__); \
		}                                                               \
	} while (0)

/* debug in interrupt handler */
#ifdef CONFIG_SECTION_ATTRIBUTE_NONXIP

#define HAL_IT_LOG(flags, fmt, arg...)                  \
	do {                                                \
		if (flags) {                                    \
			__nonxip_rodata static char __fmt[] = fmt;  \
			HAL_SYSLOG(__fmt, ##arg);                   \
		}                                               \
	} while (0)

#define HAL_IT_DBG(fmt, arg...) HAL_IT_LOG(HAL_DBG_ON, "[HAL] "fmt, ##arg)

#define HAL_IT_MBOX_DBG(fmt, arg...)   \
    HAL_IT_LOG(HAL_DBG_ON && HAL_DBG_MBOX, "[HAL MBOX] "fmt, ##arg)

#define HAL_IT_I2C_DBG(fmt, arg...)    \
    HAL_IT_LOG(HAL_DBG_ON && HAL_DBG_I2C, "[HAL I2C] "fmt, ##arg)

#define HAL_IT_WRN(fmt, arg...) HAL_IT_LOG(HAL_WRN_ON, "[HAL WRN] "fmt, ##arg)

#define HAL_IT_ERR(fmt, arg...)                             \
	do {                                                    \
		HAL_IT_LOG(HAL_ERR_ON, "[HAL ERR] %s():%d, "fmt,    \
		           __s_func, __LINE__, ##arg);              \
		if (HAL_ABORT_ON)                                   \
			HAL_ABORT();                                    \
	} while (0)

#else /* CONFIG_SECTION_ATTRIBUTE_NONXIP */

#define __s_func        __func__
#define HAL_IT_LOG       HAL_LOG
#define HAL_IT_DBG       HAL_DBG
#define HAL_IT_I2C_DBG   HAL_I2C_DBG
#define HAL_IT_MBOX_DBG  HAL_MBOX_DBG
#define HAL_IT_WRN       HAL_WRN
#define HAL_IT_ERR       HAL_ERR

#endif /* CONFIG_SECTION_ATTRIBUTE_NONXIP */

#ifdef __cplusplus
}
#endif

#endif /* _DRIVER_CHIP_PRIVATE_HAL_DEBUG_H_ */