sdk-hwV1.3/lichee/xr806/appos/project/example/vfs/prj_config.h

144 lines
4.3 KiB
C
Executable File

/*
* Copyright (C) 2017 XRADIO TECHNOLOGY CO., LTD. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of XRADIO TECHNOLOGY CO., LTD. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _PRJ_CONFIG_H_
#define _PRJ_CONFIG_H_
#ifdef __cplusplus
extern "C" {
#endif
/*
* project base config
*/
/* main thread priority */
#define PRJCONF_MAIN_THREAD_PRIO OS_THREAD_PRIO_APP
/* main thread stack size */
#define PRJCONF_MAIN_THREAD_STACK_SIZE (2 * 1024)
/* sys ctrl enable/disable */
#define PRJCONF_SYS_CTRL_EN 0
/* sys ctrl thread priority */
#define PRJCONF_SYS_CTRL_PRIO OS_THREAD_PRIO_SYS_CTRL
/* sys ctrl stack size */
#define PRJCONF_SYS_CTRL_STACK_SIZE (2 * 1024)
/* sys ctrl queue length for receiving message */
#define PRJCONF_SYS_CTRL_QUEUE_LEN 6
/* image flash ID */
#define PRJCONF_IMG_FLASH 0
/* image start address, including bootloader */
#define PRJCONF_IMG_ADDR 0x00000000
/* save sysinfo to flash or not */
#define PRJCONF_SYSINFO_SAVE_TO_FLASH 1
#if PRJCONF_SYSINFO_SAVE_TO_FLASH
/* sysinfo flash ID */
#define PRJCONF_SYSINFO_FLASH 0
/* sysinfo start address */
#define PRJCONF_SYSINFO_ADDR ((1024 - 4) * 1024)
/* sysinfo size */
#define PRJCONF_SYSINFO_SIZE (4 * 1024)
/* enable/disable checking whether sysinfo is overlap with image */
#define PRJCONF_SYSINFO_CHECK_OVERLAP 1
#endif /* PRJCONF_SYSINFO_SAVE_TO_FLASH */
/* MAC address source */
#define PRJCONF_MAC_ADDR_SOURCE SYSINFO_MAC_ADDR_CHIPID
/* watchdog enable/disable */
#define PRJCONF_WDG_EN 0
/* watchdog timeout value */
#define PRJCONF_WDG_TIMEOUT WDG_TIMEOUT_16SEC
/* watchdog feeding period (in ms), MUST less than PRJCONF_WDG_TIMEOUT */
#define PRJCONF_WDG_FEED_PERIOD (10 * 1000)
/*
* project hardware feature
*/
/* uart enable/disable */
#define PRJCONF_UART_EN 1
/* h/w crypto engine enable/disable */
#define PRJCONF_CE_EN 0
/* spi enable/disable */
#define PRJCONF_SPI_EN 0
/* Xradio internal codec sound card enable/disable */
#define PRJCONF_INTERNAL_SOUNDCARD_EN 0
/* AC107 sound card enable/disable */
#define PRJCONF_AC107_SOUNDCARD_EN 0
/* AC101 sound card enable/disable */
#define PRJCONF_AC101_SOUNDCARD_EN 0
/* I2S NULL sound card enable/disable */
#define PRJCONF_I2S_NULL_SOUNDCARD_EN 0
#define PRJCONF_TEMP_MONITOR_EN 0
/*
* project service feature
*/
/* console enable/disable */
#define PRJCONF_CONSOLE_EN 1
/* network and wlan enable/disable */
#define PRJCONF_NET_EN 0
/* environment variable "TZ" for time zone setting */
#define PRJCONF_ENV_TZ "TZ=GMT-8"
/* swd enable/disable */
#define PRJCONF_SWD_EN 0
#ifdef __cplusplus
}
#endif
#endif /* _PRJ_CONFIG_H_ */