345 lines
8.2 KiB
Plaintext
345 lines
8.2 KiB
Plaintext
if ARCH_SUNXI
|
|
|
|
config SYS_BOARD
|
|
default "sunxi"
|
|
|
|
config SYS_SOC
|
|
default "sunxi"
|
|
|
|
config IDENT_STRING
|
|
default " Allwinner Technology"
|
|
|
|
config CPU_C906
|
|
bool "sunxi riscv cpu"
|
|
select SYS_CACHE_LINE_SIZE_64
|
|
|
|
config AXP_PMIC_BUS
|
|
bool "Sunxi AXP PMIC bus access helpers"
|
|
help
|
|
Select this PMIC bus access helpers for Sunxi platform PRCM or other
|
|
AXP family PMIC devices.
|
|
config SUN6I_PRCM
|
|
bool
|
|
help
|
|
Support for the PRCM (Power/Reset/Clock Management) unit available
|
|
in A31 SoC.
|
|
config SUN8I_RSB
|
|
bool "Allwinner sunXi Reduced Serial Bus Driver"
|
|
help
|
|
Say y here to enable support for Allwinner's Reduced Serial Bus
|
|
(RSB) support. This controller is responsible for communicating
|
|
with various RSB based devices, such as AXP223, AXP8XX PMICs,
|
|
and AC100/AC200 ICs.
|
|
config SUNXI_NCAT
|
|
bool
|
|
help
|
|
Support for the sunxi ncat version 1 memory layout.
|
|
|
|
config SUNXI_NCAT_V2
|
|
bool
|
|
help
|
|
Support for the sunxi ncat version 2 memory layout.
|
|
|
|
config SUNXI_VERSION1
|
|
bool
|
|
help
|
|
Support for the sunxi version 1 memory layout.
|
|
|
|
config SUNXI_SECURE
|
|
bool
|
|
help
|
|
Support for the sunxi security
|
|
|
|
config SUNXI_SECURE_BOOT
|
|
bool "Sunxi secure boot support"
|
|
select SUNXI_IMAGE_VERIFIER
|
|
help
|
|
Enable secure boot, uboot will verify image in a secure boot.
|
|
|
|
config SUNXI_ANTI_BRUSH
|
|
bool "Sunxi anti brush support"
|
|
default n
|
|
help
|
|
Enable anti brush, uboot will verify image.
|
|
|
|
config SUNXI_PART_VERIFY
|
|
bool "Sunxi partition verify support"
|
|
depends on SUNXI_SECURE_BOOT
|
|
help
|
|
Enable this, uboot will verify rootfs when boot
|
|
|
|
config SUNXI_DM_VERITY
|
|
bool "Sunxi dm verity support"
|
|
depends on SUNXI_SECURE_BOOT
|
|
help
|
|
Enable this, uboot will support rootfs dm-verity
|
|
|
|
config SUNXI_MEM_MAPPING_CHECK
|
|
bool
|
|
default n
|
|
help
|
|
Support for the sunxi memory mapping check
|
|
|
|
config SUNXI_COMPARE_IMAGE_AND_FLASH
|
|
bool "compare image and flash size"
|
|
help
|
|
Support comparison of image and flash before burning,
|
|
if image is larger than flash, will exit burning.
|
|
default n
|
|
|
|
config SUNXI_INITRD_ROUTINE
|
|
bool "Sunxi ramdisk init routine"
|
|
default y
|
|
help
|
|
use sunxi ramdisk init routine ,witch copy ramdisk to addr defined
|
|
in boot.img head, instead of original one, whitch will copy ramdisk
|
|
to dynamically malloced addr.
|
|
|
|
config SUNXI_WDT_V2
|
|
bool "sunxi watchdog v2"
|
|
help
|
|
version2 watch dog, work as a independent peripheral
|
|
no longer included in a timer
|
|
|
|
# Note only one of these may be selected at a time! But hidden choices are
|
|
# not supported by Kconfig
|
|
config SUNXI_GEN_SUN4I
|
|
bool
|
|
---help---
|
|
Select this for sunxi SoCs which have resets and clocks set up
|
|
as the original A10 (mach-sun4i).
|
|
|
|
config SUNXI_GEN_SUN6I
|
|
bool
|
|
---help---
|
|
Select this for sunxi SoCs which have sun6i like periphery, like
|
|
separate ahb reset control registers, custom pmic bus, new style
|
|
watchdog, etc.
|
|
|
|
choice
|
|
prompt "Sunxi SoC Variant"
|
|
default MACH_SUN20IW1
|
|
|
|
config MACH_SUN20IW1
|
|
bool "sun20i(Allwinner sun20iw1)"
|
|
select CPU_C906
|
|
select SUN8I_RSB
|
|
select SUNXI_NCAT_V2
|
|
select SUNXI_WDT_V2
|
|
|
|
endchoice
|
|
|
|
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
|
|
config MACH_SUN8I
|
|
bool
|
|
select SUN8I_RSB
|
|
select SUN6I_PRCM
|
|
default y if MACH_SUN8I_V3S
|
|
|
|
config RESERVE_ALLWINNER_BOOT0_HEADER
|
|
bool "reserve space for Allwinner boot0 header"
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
---help---
|
|
Prepend a 1536 byte (empty) header to the U-Boot image file, to be
|
|
filled with magic values post build. The Allwinner provided boot0
|
|
blob relies on this information to load and execute U-Boot.
|
|
Only needed on 64-bit Allwinner boards so far when using boot0.
|
|
config DRAM_PARA_ADDR
|
|
hex
|
|
---help---
|
|
show the dram init para for sprite.
|
|
config SUNXI_FDT_ADDR
|
|
hex "device tree address for kernel"
|
|
default 44000000
|
|
---help---
|
|
set the address for start_kernel.
|
|
|
|
config SUNXI_FDT_SAVE
|
|
bool "SUNXI FDT SVAE"
|
|
default n
|
|
depends on CMD_FDT
|
|
help
|
|
This is the SUNXI FDT SAVE
|
|
|
|
config SUNXI_DTB_RESERVE_SIZE
|
|
hex "sunxi dtb reserve default size to 1M"
|
|
default 0x100000
|
|
depends on SUNXI_FDT_SAVE
|
|
help
|
|
set sunxi dtb reserve default size
|
|
|
|
config SUNXI_BOOTPKG_BASE
|
|
hex "sunxi bootpkage base for anti-brush boot"
|
|
default 0x41000000
|
|
depends on SUNXI_ANTI_BRUSH
|
|
help
|
|
set sunxi bootpakge base
|
|
|
|
config SUNXI_TURNNING_FLASH
|
|
bool "SUNXI TURNNING FLASH SVAE"
|
|
default y
|
|
help
|
|
This is the SUNXI TURNNING FLASH
|
|
|
|
config SUNXI_TURNNING_DRAM
|
|
bool "SUNXI TURNNING DRAM SVAE"
|
|
default y
|
|
help
|
|
This is the SUNXI TURNNING DRAM
|
|
|
|
config SUNXI_OTA_TURNNING
|
|
bool "SUNXI OTA TURNNING SVAE"
|
|
depends on (SUNXI_TURNNING_FALSH && SUNXI_TURNNING_DRAM)
|
|
default n
|
|
help
|
|
This is the SUNXI OTA TURNNING SAVE
|
|
|
|
config SUNXI_DEBUG
|
|
bool "the gating for uboot debug"
|
|
default false
|
|
config SUNXI_NOR_IMG
|
|
bool "crate u-boot-nor.bin"
|
|
default false
|
|
|
|
config SYS_CLK_FREQ
|
|
default 1008000000 if MACH_SUN8IW20
|
|
default 1008000000
|
|
|
|
config SYS_CONFIG_NAME
|
|
string "system config header name"
|
|
default "sun20iw1p1" if MACH_SUN20IW1
|
|
|
|
config SYS_BOARD
|
|
default "sunxi"
|
|
|
|
config SYS_SOC
|
|
default "sunxi"
|
|
|
|
config OLD_SUNXI_KERNEL_COMPAT
|
|
bool "Enable workarounds for booting old kernels"
|
|
default n
|
|
---help---
|
|
Set this to enable various workarounds for old kernels, this results in
|
|
sub-optimal settings for newer kernels, only enable if needed.
|
|
|
|
config MACPWR
|
|
string "MAC power pin"
|
|
default ""
|
|
help
|
|
Set the pin used to power the MAC. This takes a string in the format
|
|
understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
|
|
|
|
config I2C0_ENABLE
|
|
bool "Enable I2C/TWI controller 0"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
|
|
its clock and setting up the bus. This is especially useful on devices
|
|
with slaves connected to the bus or with pins exposed through e.g. an
|
|
expansion port/header.
|
|
|
|
config I2C1_ENABLE
|
|
bool "Enable I2C/TWI controller 1"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See I2C1_ENABLE help text.
|
|
|
|
config I2C2_ENABLE
|
|
bool "Enable I2C/TWI controller 2"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See I2C2_ENABLE help text.
|
|
|
|
config I2C3_ENABLE
|
|
bool "Enable I2C/TWI controller 3"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See I2C3_ENABLE help text.
|
|
config I2C4_ENABLE
|
|
bool "Enable I2C/TWI controller 4"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See I2C4_ENABLE help text.
|
|
config I2C5_ENABLE
|
|
bool "Enable I2C/TWI controller 5"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See I2C5_ENABLE help text.
|
|
config R_I2C0_ENABLE
|
|
bool "Enable R_I2C/R_TWI controller 0"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See R_I2C0_ENABLE help text.
|
|
config R_I2C1_ENABLE
|
|
bool "Enable R_I2C/R_TWI controller 1"
|
|
default n
|
|
select CMD_I2C
|
|
---help---
|
|
See R_I2C1_ENABLE help text.
|
|
|
|
|
|
config AXP_GPIO
|
|
bool "Enable support for gpio-s on axp PMICs"
|
|
default n
|
|
---help---
|
|
Say Y here to enable support for the gpio pins of the axp PMIC ICs.
|
|
|
|
|
|
config SATAPWR
|
|
string "SATA power pin"
|
|
default ""
|
|
help
|
|
Set the pins used to power the SATA. This takes a string in the
|
|
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of
|
|
port H.
|
|
|
|
config GMAC_TX_DELAY
|
|
int "GMAC Transmit Clock Delay Chain"
|
|
default 0
|
|
---help---
|
|
Set the GMAC Transmit Clock Delay Chain value.
|
|
|
|
config INITIAL_USB_SCAN_DELAY
|
|
int "delay initial usb scan by x ms to allow builtin devices to init"
|
|
default 0
|
|
---help---
|
|
Some boards have on board usb devices which need longer than the
|
|
USB spec's 1 second to connect from board powerup. Set this config
|
|
option to a non 0 value to add an extra delay before the first usb
|
|
bus scan.
|
|
|
|
config USB0_VBUS_PIN
|
|
string "Vbus enable pin for usb0 (otg)"
|
|
default ""
|
|
---help---
|
|
Set the Vbus enable pin for usb0 (otg). This takes a string in the
|
|
format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
|
|
|
|
config USB1_VBUS_PIN
|
|
string "Vbus enable pin for usb1 (ehci0)"
|
|
default ""
|
|
---help---
|
|
Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
|
|
a string in the format understood by sunxi_name_to_gpio, e.g.
|
|
PH1 for pin 1 of port H.
|
|
|
|
config USB2_VBUS_PIN
|
|
string "Vbus enable pin for usb2 (ehci1)"
|
|
default ""
|
|
---help---
|
|
See USB1_VBUS_PIN help text.
|
|
|
|
config USB3_VBUS_PIN
|
|
string "Vbus enable pin for usb3 (ehci2)"
|
|
default ""
|
|
---help---
|
|
See USB1_VBUS_PIN help text.
|
|
endif
|