sdk-hwV1.3/lichee/brandy-2.0/spl/include/arch/axp809_reg.h

116 lines
3.7 KiB
C

/*
* * Copyright 2000-2009
* * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* *
* */
#ifndef __AXP809_REGS_H__
#define __AXP809_REGS_H__
#include <arch/axp.h>
#define AXP809_CHIP_ID (0x12)
#define AXP809_DEVICE_ADDR (0x3A3)
#define AXP809_RUNTIME_ADDR (0x2d)
/*define AXP809 REGISTER*/
#define BOOT_POWER809_STATUS (0x00)
#define BOOT_POWER809_MODE_CHGSTATUS (0x01)
#define BOOT_POWER809_OTG_STATUS (0x02)
#define BOOT_POWER809_VERSION (0x03)
#define BOOT_POWER809_DATA_BUFFER0 (0x04)
#define BOOT_POWER809_DATA_BUFFER1 (0x05)
#define BOOT_POWER809_DATA_BUFFER2 (0x06)
#define BOOT_POWER809_DATA_BUFFER3 (0x07)
#define BOOT_POWER809_DATA_BUFFER4 (0x08)
#define BOOT_POWER809_DATA_BUFFER5 (0x09)
#define BOOT_POWER809_DATA_BUFFER6 (0x0a)
#define BOOT_POWER809_DATA_BUFFER7 (0x0b)
#define BOOT_POWER809_DATA_BUFFER8 (0x0c)
#define BOOT_POWER809_DATA_BUFFER9 (0x0d)
#define BOOT_POWER809_DATA_BUFFER10 (0x0e)
#define BOOT_POWER809_DATA_BUFFER11 (0x0f)
#define BOOT_POWER809_OUTPUT_CTL1 (0x10)
#define BOOT_POWER809_OUTPUT_CTL2 (0x12)
#define BOOT_POWER809_ALDO_CTL (0x13)
#define BOOT_POWER809_DLDO1_VOL (0x15)
#define BOOT_POWER809_DLDO2_VOL (0x16)
#define BOOT_POWER809_ELDO1_VOL (0x19)
#define BOOT_POWER809_ELDO2_VOL (0x1A)
#define BOOT_POWER809_ELDO3_VOL (0x1B)
#define BOOT_POWER809_DC5LDO3_VOL (0x1C)
#define BOOT_POWER809_DC1OUT_VOL (0x21)
#define BOOT_POWER809_DC2OUT_VOL (0x22)
#define BOOT_POWER809_DC3OUT_VOL (0x23)
#define BOOT_POWER809_DC4OUT_VOL (0x24)
#define BOOT_POWER809_DC5OUT_VOL (0x25)
#define BOOT_POWER809_DC23_DVM_CTL (0x27)
#define BOOT_POWER809_ALDO1OUT_VOL (0x28)
#define BOOT_POWER809_ALDO2OUT_VOL (0x29)
#define BOOT_POWER809_ALDO3OUT_VOL (0x2A)
#define BOOT_POWER809_VBUS_SET (0x30)
#define BOOT_POWER809_VOFF_SET (0x31)
#define BOOT_POWER809_OFF_CTL (0x32)
#define BOOT_POWER809_CHARGE1 (0x33)
#define BOOT_POWER809_CHARGE2 (0x34)
#define BOOT_POWER809_CHARGE3 (0x35)
#define BOOT_POWER809_BAT_AVERVOL_H8 (0x50)
#define BOOT_POWER809_BAT_AVERVOL_L4 (0x51)
#define BOOT_POWER809_DCDC_MODESET (0x80)
#define BOOT_POWER809_VOUT_MONITOR (0x81)
#define BOOT_POWER809_ADC_EN (0x82)
#define BOOT_POWER809_ADC_SPEED (0x84)
#define BOOT_POWER809_TS_ADC_SPEED (0x85)
#define BOOT_POWER809_TIMER_CTL (0x8A)
#define BOOT_POWER809_HOTOVER_CTL (0x8F)
#define BOOT_POWER809_GPIO0_CTL (0x90)
#define BOOT_POWER809_GPIO0_VOL (0x91)
#define BOOT_POWER809_GPIO1_CTL (0x92)
#define BOOT_POWER809_GPIO1_VOL (0x93)
#define BOOT_POWER809_GPIO012_SIGNAL (0x94)
#define BOOT_POWER809_GPIO3_CTL (0x95)
#define BOOT_POWER809_GPIO012_PDCTL (0x97)
#define BOOT_POWER809_INTEN1 (0x40)
#define BOOT_POWER809_INTEN2 (0x41)
#define BOOT_POWER809_INTEN3 (0x42)
#define BOOT_POWER809_INTEN4 (0x43)
#define BOOT_POWER809_INTEN5 (0x44)
#define BOOT_POWER809_INTSTS1 (0x48)
#define BOOT_POWER809_INTSTS2 (0x49)
#define BOOT_POWER809_INTSTS3 (0x4a)
#define BOOT_POWER809_INTSTS4 (0x4b)
#define BOOT_POWER809_INTSTS5 (0x4c)
#define BOOT_POWER809_FUEL_GAUGE_CTL (0xB8)
#define BOOT_POWER809_BAT_PERCEN_CAL (0xB9)
#define BOOT_POWER809_RDC1 (0xBA)
#define BOOT_POWER809_RDC0 (0xBB)
#define BOOT_POWER809_OCV1 (0xBC)
#define BOOT_POWER809_OCV0 (0xBD)
#define BOOT_POWER809_BAT_MAX_CAP1 (0xE0)
#define BOOT_POWER809_BAT_MAX_CAP0 (0xE1)
#define BOOT_POWER809_BAT_COULOMB_CNT1 (0xE2)
#define BOOT_POWER809_BAT_COULOMB_CNT0 (0xE3)
#define PMU_IRQ_STATU1 (0x48)
#define PMU_IRQ_STATU2 (0x49)
int axp809_probe_power_key(void);
int axp809_set_ddr_voltage(int set_vol);
int axp809_set_pll_voltage(int set_vol);
int axp809_set_efuse_voltage(int set_vol);
int axp809_set_sys_voltage(int set_vol, int onoff);
int axp809_axp_init(u8 power_mode);
int axp809_reg_read(u8 addr, u8 *val);
int axp809_reg_write(u8 addr, u8 val);
#endif /* __AXP809_REGS_H__ */