sdk-hwV1.3/lichee/xr806/appos/project/example/flash/main.c

141 lines
3.9 KiB
C
Executable File

/*
* Copyright (C) 2017 XRADIO TECHNOLOGY CO., LTD. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of XRADIO TECHNOLOGY CO., LTD. nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include "kernel/os/os.h"
#include "driver/chip/hal_sysctl.h"
#include "driver/chip/hal_prcm.h"
#include "driver/chip/hal_flash.h"
#include "common/board/board.h"
#define MFLASH 0
static void flash_demo(void)
{
uint32_t addr;
FlashEraseMode size_type;
uint8_t wdata[256];
uint8_t rdata[256] = {0};
int i;
for (i = 0; i < 256; i++) {
wdata[i] = i;
}
addr = 0x108000;
size_type = FLASH_ERASE_4KB;
printf("flash driver open...\n");
if (HAL_Flash_Open(MFLASH, 5000) != HAL_OK) {
printf("flash driver open failed\n");
return;
}
printf("flash erase...\n");
if (HAL_Flash_Erase(MFLASH, size_type, addr, 1) != HAL_OK) {
printf("flash erase failed\n");
goto fail;
}
printf("flash write...\n");
if (HAL_Flash_Write(MFLASH, addr, wdata, sizeof(wdata)) != HAL_OK) {
printf("flash write failed\n");
goto fail;
}
printf("flash read...\n");
if (HAL_Flash_Read(MFLASH, addr, rdata, 256) != HAL_OK) {
printf("flash read failed\n");
goto fail;
}
printf("flash read result:\n");
for (i = 0; i < 256; i++) {
printf("%d ", rdata[i]);
if (i != 0 && (i % 16) == 0)
printf("\n");
}
printf("\n");
if (memcmp(wdata, rdata, sizeof(wdata)) == 0) {
printf("flash erase write read suscess\n");
} else
printf("flash erase write read fail\n");
fail:
printf("flash driver close.\n");
if (HAL_Flash_Close(MFLASH) != HAL_OK) {
printf("flash driver close failed\n");
return;
}
}
int main(void)
{
int dev;
FlashBoardCfg *cfg = NULL;
printf("flash demo started.\n");
#if (CONFIG_CHIP_ARCH_VER == 3)
HAL_SYSCTL_SelectFlashPsramPinMap(BOARD_FLASH_PSRAM_PIN_MAP0, BOARD_FLASH_PSRAM_PIN_MAP1);
#endif
dev = HAL_MKDEV(HAL_DEV_MAJOR_FLASH, PRJCONF_IMG_FLASH);
HAL_BoardIoctl(HAL_BIR_GET_CFG, dev, (uint32_t)&cfg);
if (cfg == NULL) {
printf("getFlashBoardCfg failed");
return 0;
}
if (cfg->type == FLASH_DRV_FLASHC) {
cfg->flashc.param.freq = cfg->clk;
#if (CONFIG_CHIP_ARCH_VER == 3)
if (HAL_PRCM_IsFlashSip()) {
cfg->flashc.param.cs_mode = FLASHC_FLASHCS1_PSRAMCS0;
} else {
cfg->flashc.param.cs_mode = FLASHC_FLASHCS0_PSRAMCS1;
}
#endif
} else if (cfg->type == FLASH_DRV_SPI) {
cfg->spi.port = BOARD_SPI_PORT;
cfg->spi.cs = SPI_TCTRL_SS_SEL_SS0;
cfg->spi.cs_level = BOARD_SPI_CS_LEVEL;
}
HAL_Flash_Init(MFLASH, cfg);
flash_demo();
HAL_Flash_Deinit(MFLASH);
printf("flash demo over.\n");
return 0;
}